|
|
|
|
|
WPM Outdoor Enclosure
|
|
 |
|
|
Compex WPM Outdoor Enclosure is designed for long term use in outdoor
application. The Die Cast Aluminum Alloy Enclosure offers unsurpassed
resistance to corrosion. |
|
| |
| An antenna
can be mounted using the swivelling bracket. The bracket allows the
antenna mounted to be turned left and right, up and down for the best
antenna alignment. |
| |
| With the
addition of IP67 Water-Proof RJ45 Cable-Gland, attached LED, Membrane
Vent (optional), and N-type connectors (optional), Compex WPMA Enclosure
provides a complete outdoor solution. |
| |
| |
|
| General
Information |
|
Enclosure Material: |
Aluminium |
|
Enclosure Color: |
Grey |
|
Weight: |
1.5Kg |
|
Outside Dimension: |
237mm x 235mm x
103mm |
|
Inside Dimension: |
210mm x 130mm
48mm |
|
Ethernet
Interface: |
IP67 Water-Proof RJ45
Cable-Gland |
|
Connectors: |
4 x N-Type
connectors (Male, optional) |
|
|
1 x M12 Hole for
Membrane Vent or LED |
|
Ratings of Casing: |
IP66 |
|
Mount: |
Pole Mount or
Wall Mount |
|
| Specifications
are subjected to change without notice. |
| Ordering
Configurations |
|
Codes: |
Setting |
Description |
|
WPM-RJ45CG: |
- |
WPM Enclosure
(IP66) |
|
WPM-RJ45-CON |
Default |
RJ45 Cable-Gland
(IP67) |
|
WPM-LED4B: |
Default |
LED for Power LED,
Antenna Alignment LED or other purpose |
|
WPM-IPEX-NM: |
Optional |
IPEX to N-type
(Male) RF Cable |
|
WPM-CB54 |
Optional |
Carrier Board for
Compex WP54 PCBA |
|
WPM-MBV:
|
Optional
|
Membrane Vent
Allow
the free passage of gases and vapors, equalizing the pressure
differential between the enclosure and ambient environments. Water,
dust and dirt are repelled, thereby protecting expensive and
sensitive electronics. |
Datasheet Download |
| |
| [
Back to Top ] |
|
|
|
|
|
|
WPMA
Enclosure
|
 |
|
Compex WPMA Outdoor Enclosure is designed for long term use in outdoor
application. The Die Cast Aluminum Alloy Enclosure offers unsurpassed
resistance to corrosion.
An integrated 17dBi
'A-band' or 14dBi 'G-band' (depends on order configuration) directional
weather-proof antenna eliminates the need for bulky and costly cables.
The high loss of gain via external RF cable is also avoided.
With the addition of
IP67 Water-Proof RJ45 Cable-Gland, attached LED, Membrane Vent
(optional), and N-type connectors (optional), Compex WPMA Enclosure
provides a complete outdoor solution. |
| |
| General
Information |
|
Enclosure Material: |
Aluminium |
|
Enclosure Color: |
Grey |
|
Weight: |
2.0Kg |
|
Outside Dimension: |
260mm x 251mm x
143mm |
|
Inside Dimension: |
210mm x 130mm
48mm |
|
Ethernet
Interface: |
IP67 Water-Proof RJ45
Cable-Gland |
|
Connectors: |
4 x N-Type
connectors (Male, optional) |
|
|
1 x M12 Hole for
Membrane Vent or LED |
|
Ratings of Casing: |
IP66 |
|
Integrated Antenna |
17dBi 'A-band' Directional
antenna |
|
14dBi 'G-band'
Directional antenna |
|
Mount: |
Pole Mount or
Wall Mount |
|
Datasheet Download |
| |
| [
Back to Top ] |
|
| |
|
|
